Correctly place the nylon conveyor belt, secure one end of the belt with a clamp, and connect the rear with the rope around the roller and pulley. The conveyor belt is balanced on the conveyor through the traction device. When traction, transportation should be avoided. In workplaces that are not suitable for shelves, conveyor rolls can be guided. The conveyor belt at the stack has a large radius of curvature to prevent damage to the conveyor belt. It is forbidden to put heavy objects on the conveyor belt at the creases. If you want to replace the conveyor belt, you can connect the old conveyor belt to the new conveyor belt so that you can remove the conveyor belt and install the new conveyor belt at the same time.