- Conveyor belt configuration,- Entry conditions,- Weather conditions.Significantly reduce downtime. It can withstand working tension up to 200 N/mm (belt breaking strength up to 2000 N/mm).
- Conveyor belt configuration,- Entry conditions,- Weather conditions.Significantly reduce downtime. It can withstand working tension up to 200 N/mm (belt breaking strength up to 2000 N/mm).
It comes in different qualities of rubber (see below).
General data
Belt thickness, mm | 4-11 | 4-13 | 4-15 | 4-15 | 4-13 | 7-20,5 | 7-20,5 | 7-19 | |||
Max. belt strength tension, N/mm | 315 | 630 | 800 | 1 000 | 1250 | 1 800 | 2000 | ||||
Mini. Pulley Ø, mm | 160-200 | 200-300 | 250-350 | 250-400 | 300-350 | 300-400 | 300-500 | 400-800 | 500-1000 | ||
Thickness top plate, mm | 4 | 5 | 6 | 6 | 7 | 8 | 9 | 7 | 8 | 7 | 8.5 |
Thickness bottom plate, mm | 3,8 | 4.2 | 5,5 | 6 |
advantage
- No physical installation required
- Quick installation (saves downtime)
- All-weather installation
- Install using a battery-operated screwdriver
No need for electricity
- No expensive equipment is used/required
- No need for highly skilled operators
- Abrasion and cutting resistance
- High tensile strength
- Flexible - can be used for bridging even with different belt bodies
- Suitable for high temperature belts up to 200°C
- Compatible with small pulley diameter
- Compatible with conveyor scraper
- No drilling preparation, no template
- Self-tapping screws through the belt
- Can be used for coil or "ready to use" cutting lengths
- Many rubber qualities are available
FASTENER SCREWS
General data
Fastener Screws | 35 | 63 | 65 | 80 | 85 | 100 | 105 | 125 | 180 | 200 |
Belt thickness, mm | 4-11 | 4-13 | 4-15 | 4-15 | 4-15 | 7-20 | 7-20.5 | 7-20.5 | ||
Max. belt strength tension, N/mm | 315 | 630 | 800 | 1000 | 1250 | 1800 | 2000 | |||
Mini. Pulley Ø, mm | 160-200 | 200-300 | 300-400 | 400-600 | 400-800 | 400/800 | 500/1000 | |||
Thickness top plate, mm | 4 | 5 | 6 | 6 | 6 | 6 | 6 | 7 | 6.5 / 8.5 | 8.5 |
Thickness bottom plate, mm | 3.8 | 4.2 | 5.5 | 6~8 | 6~8 | |||||
Joint pallet width (mm) | 72 | 110 | 156 | 256 | ||||||
Fastener Screws | 35 | 63 | 65 | 80 | 85 | 100 | 105 | 125 | 180 | 200 |
Coil length, Meter | 20 | 20 | 16 | |||||||
Screw Ø, mm | 5 | 6 | ||||||||
Qty of screws per meter | 110 | 200 | 280 | 254 | ||||||
Fastener Screws main uses. | ||||||||||
Abrasion resistant > | Stone; rock ; Sand | |||||||||
Heat resistant 200℃ > | Cement plant; Steel plant; coking plant. | |||||||||
Oil resistant | Oil resistant |