Place the nylon conveyor belt correctly, fix one end of the conveyor belt with a clamp, and connect the back with the rope that goes around the rollers and pulleys. The conveyor belt is balanced on the conveyor by the traction device. When towing, transportation should be avoided. In workplaces that are not suitable for placing on a shelf, the conveyor belt can be guided to roll. The conveyor belt at the stack fold has a larger radius of curvature to prevent damage to the conveyor belt. It is forbidden to put heavy objects on the conveyor belt at the crease. If the conveyor belt is to be replaced, the old conveyor belt and the new conveyor belt can be connected together so that the conveyor belt can be removed and the new conveyor belt can be installed at the same time.